Categories

Shop By Category

Suspendisse miaculis placerat sapien at comodous loremous

 Loading... Please wait...
Free UPS Ground shipping (4-5 days) on orders over $99 in the contiguous United States.

banner-cat.jpg

Field Destroy Warranty Program Instructions

Watch this video for instructions and look below to find a list of products eligible for our field destroy program:


Some products we sell are eligible for credit or replacement through our Field Destroy program. Instead of sending them back to us, follow these instructions and email your pictures to returns@HeadlightRevolution.com

In order to be eligible for credit you must send us pictures that we can use. We need to be able to tell from your picture that they are indeed the products we sell, and not a counterfeit, and we need to be able to read the serial number. If you cannot follow these simple guidelines as listed in the video above, please do not attempt to use our field destroy program.

DON'T SEND BLURRY PICTURES!

field-destroy-blurry-1.jpg field-destroy-blurry-2.jpg

field-destroy-blurry-3.jpg

Field Destroy ONLY Available for these Brands:

GTR Lighting

Supernova

STARR HID

Morimoto (Sometimes - Ask us first)

Diode Dynamics (Sometimes - Ask us first)

LED Concepts (Sometimes - Ask us first)

Profile Performance (Sometimes - Ask us first)

Heretic Studio (Sometimes - Ask us first)

 



EXAMPLE PICTURES:

WARNING: If you don't follow our guidelines and example pictures, you may accidentally forfeit your right to a replacement product. Please watch the video, above, for full instructions. Email your pictures and replacement request to: returns@HeadlightRevolution.com 


D1S, D2S, D3S, D4S OEM Style HID Bulbs:

Ensure we can tell what brand bulb it is and show clearly that the ceramic-coated return wire has been disconnected, or the bulb is otherwise permanently out of commission. 

field-destroy-d2s.jpg

DRL and Fog Light LED Bulbs:
Ensure we can tell what brand it is, and show the bulb physically dislocated from the base.

field-destroy-small-led-1.jpg

HID Ballasts:
Ensure we can tell what brand the ballast is, that we can clearly see the serial number, and that the cables are cut off as close to the body of the ballast as possible. It should be obvious that there's no way to reconnect the cables to the ballast. When sending in your picture for this product, also type out the serial number in the email, in case it's hard to read in your picture.

field-destroy-ballast.jpg

Supernova LED Headlight Bulbs:
Ensure we can tell what brand the bulb is, that we can clearly see the serial number on the tag on the wires, and that the cables are cut off as close to the body of the bulb and driver as possible. It should be obvious that there's no way to reconnect the cables to the bulb or driver. When sending in your picture for this product, also type out the serial number in the email, in case it's hard to read in your picture.

field-destroy-supernova-v3.jpg

GTR Lighting LED Headlight Bulbs
Ensure we can tell what brand the bulb is, that we can clearly see the serial number, and that the cables are cut off as close to the body of the bulb as possible. It should be obvious that there's no way to reconnect the cables to the bulb or driver. When sending in your picture for this product, also type out the serial number in the email, in case it's hard to read in your picture.

field-destroy-gtr-ultra-led.jpg

Flexible LED Strip Lighting:
Chop up the strip (any length: 12", 2 feet, 15 feet, etc...) into chunks as to demonstrate that nobody would reasonably use the strip anymore and that it is in fact "destroyed". 

field-destroy-flexible-led.jpg

Festoon / Interior Dome Light Bulbs
Either brake the bulbs apart with pliers as shown, or show them installed and defective. Turn them on in your housing, and show that something's not working properly to get credit.

field-destroy-festoon.jpg

LED Interior T10 Bulbs
Most T10/T15/T5 LED bulbs are easy to break with your hands, but pliers can also be used. Separate the LED bulb top from the base and show that the bulb is appropriately destroyed.

field-destroy-t10.jpg

Supernova PerfectFIT LED Headlight Bulbs:
Try to show us the brand logo on the bulb as well as the serial number in your picture. The Supernova PerfectFIT LED bulbs are pretty hard to break. You will most certainly need a pliers, a saw, or other tool to destroy them. You can do it how we show you in this picture, or use your own creativity to show us that they are effectively destroyed.  When sending in your picture for this product, also type out the serial number in the email, in case it's hard to read in your picture.

field-destroy-supernova-perfectfit.jpg

HID Bulbs:
The only place you need to cut HID bulbs is at the base of the bulb. Don't worry about cutting up the harness.  Make sure it's obvious in the picture what the brand is of the bulb. If we can't tell, your warranty may be denied. When sending in your picture for this product, also type out the serial number in the email, in case it's hard to read in your picture.

field-destroy-hid-bulb.jpg

Turn Signal LED Bulbs:
Most smaller LED bulbs like this Ultra Series from GTR Lighting are easy to break with your hands. You can use a pliers or other hand tools if necessary. This type of destruction is applicable for all GTR Lighting Carbide Series, Reflex Series, Lightning Series and Ultra Series turn signals and DRL/Fog bulbs. In your picture please show the brand name of the bulb if applicable.

field-destroy-ultra-small.jpg

Back to Top